How To Replace A Bathroom Fan Light Combo No Attic Access

Replacing a bathroom fan light combo without attic access can be a challenging task, but it is possible with the right tools and techniques. This article will provide a step-by-step guide on how to do it safely and efficiently.

Before you begin, you will need to gather the following tools and materials:

New bathroom fan light combo
Screwdriver
Wire cutters
Electrical tape
Caulk gun
Caulk

Once you have gathered your tools and materials, you can begin the replacement process.

1. Turn Off the Power

The first step is to turn off the power to the bathroom fan light combo at the circuit breaker. This will prevent you from getting shocked while you are working.

2. Remove the Old Fan Light Combo

Once the power is off, you can remove the old fan light combo. To do this, simply unscrew the screws that are holding it in place and carefully pull it out of the ceiling.

3. Disconnect the Wires

Once the fan light combo is out of the ceiling, you need to disconnect the wires. To do this, use wire cutters to cut the wires about 6 inches from the fan light combo. Once the wires are cut, you can strip the ends of the wires about 1/2 inch.

4. Connect the New Fan Light Combo

Now you can connect the new fan light combo. To do this, simply match the wires from the new fan light combo to the wires from the ceiling. Connect the black wire to the black wire, the white wire to the white wire, and the green wire to the green wire. Once the wires are connected, use electrical tape to secure them.

5. Install the New Fan Light Combo

Now you can install the new fan light combo. To do this, simply insert the fan light combo into the ceiling and screw it into place.

6. Caulk Around the Fan Light Combo

Once the fan light combo is installed, you need to caulk around it to seal it. To do this, simply apply a bead of caulk around the edge of the fan light combo and smooth it out with your finger.

7. Turn on the Power

Once the caulk is dry, you can turn on the power to the bathroom fan light combo. To do this, simply flip the circuit breaker back on.

Replacing a bathroom fan light combo without attic access can be a challenging task, but it is possible with the right tools and techniques. By following the steps outlined in this article, you can safely and efficiently replace your old fan light combo with a new one.