How To Replace A Two Handle Bathroom Faucet

How to Replace a Two-Handle Bathroom Faucet

Replacing a two-handle bathroom faucet is a straightforward task that can be completed in under an hour. With a few basic tools and a little elbow grease, you'll be able to revive your bathroom's faucets and restore them to their former glory.

Tools and Materials:

Adjustable wrench or basin wrench
Phillips head screwdriver
New two-handle bathroom faucet
Plumber's putty
Bucket or bowl

Step-by-Step Guide:

Turn off the water supply: Locate the shut-off valves under the sink and turn them clockwise to turn off the water supply to the faucet.
Release any remaining water: Open the faucet handles to release any remaining water in the lines.
Disconnect the water supply lines: Use an adjustable wrench or basin wrench to disconnect the water supply lines from the faucet. Place a bucket or bowl under the connections to catch any water that escapes.
Remove the old faucet: Using a Phillips head screwdriver, unscrew the mounting nuts that hold the faucet in place. Carefully lift the old faucet off the sink.
Apply plumber's putty: Roll out a small ball of plumber's putty and create a thin ring around the base of the new faucet.
Install the new faucet: Place the new faucet over the plumber's putty and carefully tighten the mounting nuts by hand until they are secure.
Reconnect the water supply lines: Hand-tighten the water supply lines to the faucet. Use the adjustable wrench to tighten them further, but be careful not to overtighten.
Turn on the water supply: Slowly turn on the shut-off valves and check for leaks. If there are any leaks, tighten the connections accordingly.
Test the faucet: Turn the faucet handles to make sure they operate smoothly and there are no leaks.

Tips:

If the old faucet is particularly stubborn, you may need to use penetrating oil to loosen the mounting nuts.
Be careful not to overtighten the connections, as this can damage the faucet or the sink.
If you are not comfortable performing this task yourself, don't hesitate to seek the assistance of a qualified plumber.

Conclusion:

Replacing a two-handle bathroom faucet is a relatively simple task that can save you money and give your bathroom a fresh, updated look. By following these steps and using the right tools and materials, you can easily revive your bathroom's faucets and enjoy trouble-free operation for years to come.