How To Replace Old Nutone Bathroom Fan

How to Replace an Old Nutone Bathroom Fan

Bathroom fans are an essential part of any bathroom, as they help to remove moisture and odors from the air. If your bathroom fan is old or not working properly, it's important to replace it as soon as possible. Here's a step-by-step guide on how to replace an old Nutone bathroom fan:

Step 1: Safety First

Before you start working on the fan, turn off the power to the bathroom at the circuit breaker or fuse box. Also, make sure to wear safety glasses and gloves.

Step 2: Remove the Old Fan

Locate the screws that are holding the old fan in place and remove them. Gently pull the fan straight down to detach it from the ceiling.

Step 3: Disconnect the Wires

Once the fan is removed, you will need to disconnect the wires that are connected to it. Note which wire goes to which terminal so that you can connect them correctly to the new fan.

Step 4: Prepare the New Fan

Take the new fan out of the box and remove all of the packaging. Assemble the fan according to the manufacturer's instructions.

Step 5: Install the New Fan

Fit the new fan into the ceiling joists and secure it with screws.

Step 6: Connect the Wires

Connect the wires from the new fan to the wires from the ceiling, making sure to match the colors of the wires. Secure the connections with wire nuts.

Step 7: Test the Fan

Turn on the power to the bathroom and test the fan to make sure that it is working properly.

Tips:

If you are not comfortable working with electrical wiring, it is best to hire a qualified electrician to replace the fan for you.

Make sure that the new fan is the same size as the old fan so that it will fit properly in the ceiling opening.

Consider installing a fan with a built-in humidity sensor, which will automatically turn on the fan when the humidity level in the bathroom rises.