How To Restain Bathroom Vanity

How to Restain Bathroom Vanity

Restoring a bathroom vanity is a great way to refresh the look of your bathroom without having to replace the entire unit. By applying a new coat of stain, you can completely transform the color and finish of your vanity, giving it a whole new look.

Restoring a bathroom vanity is a relatively simple project that can be completed in a few hours. However, it is important to follow the steps carefully to ensure a professional-looking finish.

Materials you will need:

Sandpaper (120-grit and 220-grit)
Tack cloth
Wood stain
Foam brush or paintbrush
Polyurethane (optional)
Screwdriver
Clean rags

Instructions:

Remove the hardware.

Before you begin sanding or staining, remove all of the hardware from the vanity, including the knobs, pulls, and hinges. 2.

Sand the vanity.

Use 120-grit sandpaper to sand the entire surface of the vanity, including the doors and drawers. Be sure to sand with the grain of the wood. Once you have sanded the entire surface, switch to 220-grit sandpaper and sand lightly to smooth out any rough spots. 3.

Wipe down the vanity.

Use a tack cloth to wipe down the vanity and remove any dust or sanding residue. 4.

Apply the stain.

Apply a thin, even coat of wood stain to the vanity using a foam brush or paintbrush. Be sure to follow the grain of the wood and apply the stain in the direction of the grain. Allow the stain to dry completely according to the manufacturer's instructions. 5.

Sand lightly.

Once the stain is dry, sand the vanity lightly with 220-grit sandpaper to smooth out any rough spots. 6.

Apply a second coat of stain (optional).

If you want a darker finish, you can apply a second coat of stain. Allow the second coat to dry completely according to the manufacturer's instructions. 7.

Apply polyurethane (optional).

If you want to protect the finish of your vanity, you can apply a coat of polyurethane. Polyurethane is a clear finish that will help to protect the vanity from scratches and wear. Allow the polyurethane to dry completely according to the manufacturer's instructions. 8.

Reattach the hardware.

Once the finish is dry, you can reattach the hardware to the vanity.

Tips:

* If you are unsure of the type of wood your vanity is made of, you can test the stain on a small, inconspicuous area first. * If you are staining a vanity that has been previously painted, you will need to remove the paint before you can stain it. You can do this by using a chemical stripper or by sanding the paint off. * If you are staining a vanity that has been previously stained, you may need to sand the old stain off before you can apply a new coat of stain. * Be sure to allow the stain and polyurethane to dry completely before using the vanity.