How To Take A Delta Bathroom Faucet Apart

How to Take a Delta Bathroom Faucet Apart

Delta bathroom faucets are known for their durability and reliability. However, even the best faucets can sometimes need to be repaired. If you're experiencing problems with your Delta faucet, one of the first steps is to take it apart to identify the problem.

Taking apart a Delta bathroom faucet is not a difficult task, but it does require some basic tools and knowledge. In this article, we will provide you with step-by-step instructions on how to take apart a Delta bathroom faucet.

Tools You Will Need

Phillips head screwdriver
Adjustable wrench
Pliers
Bucket or bowl
Rags

Step-by-Step Instructions

1. Turn off the water supply. The first step is to turn off the water supply to the faucet. This can be done by closing the shut-off valves located under the sink.

2. Remove the aerator. The aerator is the small, screen-like device that is located at the tip of the faucet. Use a pair of pliers to unscrew the aerator.

3. Remove the handle. The handle is held in place by a screw. Use a Phillips head screwdriver to remove the screw and then pull the handle off.

4. Remove the cartridge. The cartridge is the heart of the faucet. It is responsible for controlling the flow of water. To remove the cartridge, use an adjustable wrench to loosen the bonnet nut. Once the bonnet nut is loose, you can pull the cartridge out of the faucet body.

5. Inspect the cartridge. Once you have removed the cartridge, inspect it for damage. If the cartridge is damaged, it will need to be replaced.

6. Reassemble the faucet. To reassemble the faucet, simply reverse the steps that you took to disassemble it. Be sure to tighten all of the screws and nuts securely.

Conclusion

Taking apart a Delta bathroom faucet is not a difficult task. By following the steps outlined in this article, you can easily disassemble and repair your faucet.