Installing A Pedestal Bathroom Sink

Installing a pedestal bathroom sink is a fairly straightforward project that can be completed in a few hours. However, there are a few key steps that you need to follow in order to ensure that the sink is installed correctly and safely.

Materials You'll Need

* Pedestal sink * Pedestal base * Sink faucet * Drain assembly * Plumber's putty * Adjustable wrench * Basin wrench * Level * Screwdriver * Hacksaw

Step 1: Prepare the Sink and Base

* Start by assembling the pedestal base according to the manufacturer's instructions. * Once the base is assembled, place it in the desired location. * Use a level to make sure that the base is level in both directions.

Step 2: Install the Drain Assembly

* Apply a bead of plumber's putty around the base of the drain assembly. * Insert the drain assembly into the drain hole in the sink. * Tighten the drain assembly using an adjustable wrench.

Step 3: Install the Sink Faucet

* Apply a bead of plumber's putty around the base of the sink faucet. * Insert the faucet into the faucet holes in the sink. * Tighten the faucet using a basin wrench.

Step 4: Connect the Water Supply Lines

* Connect the water supply lines to the faucet according to the manufacturer's instructions. * Use an adjustable wrench to tighten the connections.

Step 5: Install the Sink on the Base

* Carefully lift the sink and place it on top of the pedestal base. * Align the sink with the base and make sure that it is level. * Once the sink is in place, tighten the nuts that secure it to the base.

Step 6: Connect the Drain Line

* Cut the drain line to the appropriate length using a hacksaw. * Attach the drain line to the drain assembly. * Tighten the connection using an adjustable wrench.

Step 7: Finish Up

* Turn on the water supply and check for leaks. * If there are any leaks, tighten the connections until the leaks stop. * Clean up any excess plumber's putty. * Enjoy your new pedestal bathroom sink!