Remove Faucet Bathroom Sink

Removing a Faucet from a Bathroom Sink: A Comprehensive Guide

Replacing a bathroom sink faucet is a relatively simple plumbing task that can be completed in a few hours. By following these steps, you can ensure that the job is done correctly and without any major problems.

Step 1: Gather Your Tools

Before you start, you will need to gather the following tools:

Adjustable wrench
Allen wrench
Basin wrench
Flashlight
New faucet
Plumber's putty
Rags
Safety glasses

Step 2: Turn Off the Water Supply

The first step is to turn off the water supply to the sink. This is usually done by turning off the valves located under the sink. If there are no valves, you will need to turn off the main water supply to the house.

Step 3: Disconnect the Water Lines

Once the water supply is turned off, you can disconnect the water lines from the faucet. To do this, use an adjustable wrench to loosen the nuts that connect the lines to the faucet.

Step 4: Remove the Faucet

Once the water lines are disconnected, you can remove the faucet. To do this, use an Allen wrench to loosen the screws that hold the faucet in place. Once the screws are loose, you can lift the faucet out of the sink.

Step 5: Clean the Sink Surface

Before you install the new faucet, it is important to clean the sink surface. This will help to ensure that the new faucet will seal properly.

Step 6: Apply Plumber's Putty

Once the sink surface is clean, you can apply a bead of plumber's putty around the base of the new faucet. This will help to seal the faucet and prevent water from leaking.

Step 7: Install the New Faucet

Now you can install the new faucet. To do this, place the faucet in the sink and tighten the screws that hold it in place.

Step 8: Reconnect the Water Lines

Once the faucet is installed, you can reconnect the water lines. To do this, tighten the nuts that connect the lines to the faucet.

Step 9: Turn On the Water Supply

The final step is to turn on the water supply. Check for leaks around the faucet and tighten any loose connections as needed.

Congratulations! You have now successfully removed and replaced a bathroom sink faucet.