Replace Knobs On Bathroom Faucet

Essential Aspects of Replacing Knobs on Bathroom Faucets

Replacing the knobs on a bathroom faucet is a relatively simple task that can be completed in a few minutes with the right tools and materials. However, there are a few essential aspects to keep in mind to ensure a successful repair. ### Tools and Materials * New faucet knobs * Adjustable wrench * Allen wrench (if necessary) * Screwdriver * Rags ### Step-by-Step Instructions 1.

Turn off the water supply.

Locate the water supply valves under the sink and turn them off clockwise. 2.

Remove the old knobs.

Use the adjustable wrench to loosen the nuts holding the knobs in place. Once loosened, remove the knobs by hand. 3.

Inspect the stems.

The stems are the metal shafts that extend from the faucet body. If they are worn or damaged, they may need to be replaced as well. 4.

Install the new knobs.

Align the new knobs with the stems and tighten the nuts by hand. Then, use the adjustable wrench to fully tighten the nuts. 5.

Turn on the water supply.

Slowly turn on the water supply valves under the sink and check for leaks. ### Troubleshooting *

Leaking faucet:

If the faucet is leaking after you have replaced the knobs, it may be due to a damaged stem. Replace the stem and try again. *

Knobs are loose:

If the knobs are loose, tighten the nuts with the adjustable wrench. *

Knobs are difficult to turn:

If the knobs are difficult to turn, lubricate the stems with a silicone lubricant. ### Conclusion By following these essential aspects, you can successfully replace the knobs on your bathroom faucet and ensure a leak-free, well-functioning fixture.