What Is French For Bathroom Sink Drainage

What Is French for Bathroom Sink Drainage?

If you're dealing with a clogged bathroom sink in France, or simply want to know the correct terminology for its drainage components, here's a comprehensive guide to help you out.

Siphon (Sink Trap)

The siphon is a U-shaped pipe that prevents sewer gases from escaping into the bathroom. It's also referred to as the "odor trap" or "P-trap." In French, it's called a "siphon" or "bonde siphon."

Trop-Plein (Overflow)

The trop-plein is a small hole or opening in the sink, usually near the edge. It serves as an overflow to prevent water from spilling over the sink in case the faucet is left running. In English, it's known as the "overflow."

Bonde (Drain Hole)

The bonde is the actual drain hole at the bottom of the sink. It's typically covered by a pop-up stopper or grid strainer. In French, it's simply called the "bonde" or "bonde d'évier." You may also hear the term "crépine" which refers to the strainer.

Clapet de Vidange (Pop-up Stopper)

The clapet de vidange is a device that plugs the drain hole, allowing you to fill the sink with water. It can be operated by pushing or pulling a lever or knob. In English, it's known as the "pop-up stopper" or "drain stopper."

Flexible Hose (Flexible Drain)

The flexible hose is a corrugated pipe that connects the sink drain to the wastewater pipe. It allows for movement and adjustment of the sink. In French, it's called the "flexible" or "tuyau flexible d'évacuation."

Robinet d'Arrêt (Stopcock)

The robinet d'arrêt is a valve that controls the water supply to the sink. It's usually located under the sink and can be turned on or off to stop or start the flow of water. In English, it's referred to as the "stopcock" or "water supply valve."