How To Change Leaking Bathroom Faucet

How to Change a Leaking Bathroom Faucet

A leaking bathroom faucet is a common problem that can waste water and energy. If you notice a leak, it's important to fix it as soon as possible. Here are the steps on how to change a leaking bathroom faucet:

1. Gather your tools and materials.

You will need the following tools and materials to change a leaking bathroom faucet:

Adjustable wrench
Phillips head screwdriver
Flat head screwdriver
New faucet
Faucet seat wrench (optional)
Plumber's putty
Teflon tape

2. Turn off the water supply.

The first step is to turn off the water supply to the faucet. There are usually two shut-off valves under the sink, one for hot water and one for cold water. Turn both valves clockwise to turn off the water.

3. Remove the old faucet.

Once the water supply is turned off, you can remove the old faucet. Start by disconnecting the water supply lines from the faucet. Use an adjustable wrench to loosen the nuts that hold the water supply lines in place. Once the water supply lines are disconnected, you can remove the faucet from the sink. To do this, use a Phillips head screwdriver to remove the screws that hold the faucet in place. Once the screws are removed, you can lift the faucet out of the sink.

4. Install the new faucet.

Before you install the new faucet, you need to apply plumber's putty to the base of the faucet. Plumber's putty is a type of sealant that helps to create a watertight seal between the faucet and the sink. Once you have applied plumber's putty to the base of the faucet, you can insert the faucet into the sink. Make sure that the faucet is centered in the sink and that the water supply lines are aligned with the faucet.

Once the faucet is in place, you can tighten the nuts that hold the water supply lines in place. Use an adjustable wrench to tighten the nuts until they are snug. Once the water supply lines are tightened, you can turn on the water supply and check for leaks.

5. Check for leaks.

Once the new faucet is installed, turn on the water supply and check for leaks. If you see any leaks, you may need to tighten the nuts that hold the water supply lines in place. You may also need to apply more plumber's putty to the base of the faucet.

6. Finish up.

Once you are satisfied that there are no leaks, you can finish up by replacing the faucet handle. To do this, simply insert the handle into the faucet and tighten the screws that hold it in place. Once the handle is in place, your new faucet is ready to use.

Tips

Here are a few tips for changing a leaking bathroom faucet:

If you are not comfortable changing a faucet yourself, you can call a plumber to do it for you.
Before you start, make sure that you have all of the necessary tools and materials.
Be careful not to overtighten the nuts that hold the water supply lines in place.
If you see any leaks, do not hesitate to tighten the nuts or apply more plumber's putty.