How To Remove A Nutone Bathroom Vent Fan

Bathroom vent fans are essential for removing moisture and odors from your bathroom. They also help to prevent mold and mildew growth. If your Nutone bathroom vent fan is not working properly, it is important to remove and inspect it. Here are the steps on how to remove a Nutone bathroom vent fan:

1. Gather Your Tools

Before you begin, gather the following tools:

Phillips head screwdriver
Flat head screwdriver
Wire cutters
Needle-nose pliers
Safety glasses
Dust mask

Make sure the fan is turned off and the power is disconnected before you begin working.

2. Remove the Vent Cover

The vent cover is usually held in place by a few screws. Use a Phillips head screwdriver to remove the screws. Be careful not to drop the screws. Once the screws are removed, you can pull the vent cover off.

3. Disconnect the Wiring

Once the vent cover is removed, you will see the wiring that connects the fan to the power supply. Use a wire cutter to cut the wires. Be careful not to touch the bare wires with your hands.

4. Remove the Fan Housing

The fan housing is usually held in place by a few screws. Use a Phillips head screwdriver to remove the screws. Be careful not to drop the screws. Once the screws are removed, you can pull the fan housing off.

5. Remove the Fan Motor

The fan motor is usually held in place by a few screws. Use a Phillips head screwdriver to remove the screws. Be careful not to drop the screws. Once the screws are removed, you can pull the fan motor out of the housing.

6. Clean the Fan Components

Once you have removed the fan motor, you can clean the fan components. Use a damp cloth to wipe down the fan blades and housing. You can also use a vacuum cleaner to remove any dust or debris. Make sure the fan components are completely dry before you reassemble the fan.

7. Reassemble the Fan

To reassemble the fan, simply follow the steps in reverse order. First, insert the fan motor into the housing. Then, replace the fan blades. Next, connect the wiring. Finally, replace the vent cover.