How To Replace A Rusty Bathroom Sink Drain Stopper

How to Replace a Rusty Bathroom Sink Drain Stopper

A rusty bathroom sink drain stopper is not only an eyesore, but it can also be a breeding ground for bacteria. If you're looking to replace your rusty drain stopper, here's a step-by-step guide to help you get the job done quickly and easily.

Materials You'll Need:

New drain stopper
Adjustable wrench
Plumber's putty (optional)
Rags

Step-by-Step Instructions:

1. Turn off the Water Supply: Before you start, turn off the water supply to your sink. This will prevent water from leaking out when you remove the drain stopper.

2. Remove the Old Drain Stopper: Use an adjustable wrench to loosen the nut that holds the drain stopper in place. Once the nut is loose, you can remove the old drain stopper by hand.

3. Clean the Drain Hole: Once the old drain stopper is removed, use a rag to clean the drain hole. Remove any debris or rust that may have accumulated.

4. Apply Plumber's Putty (Optional): If you want to create a watertight seal, apply a thin layer of plumber's putty around the base of the new drain stopper. This will help prevent water from leaking around the stopper.

5. Insert the New Drain Stopper: Insert the new drain stopper into the drain hole. Ensure it is properly seated and aligned.

6. Tighten the Nut: Use the adjustable wrench to tighten the nut that holds the drain stopper in place. Don't overtighten the nut, as this can damage the drain stopper or the sink.

7. Turn on the Water Supply: Turn on the water supply to your sink and check for leaks. If there are any leaks, tighten the nut further until the leak stops.

Tips:

If you have a pop-up drain stopper, you may need to remove the linkage before you can remove the drain stopper.
If the nut is stuck, you can try using penetrating oil to loosen it.
If you're not comfortable replacing the drain stopper yourself, you can always call a plumber for help.

Replacing a rusty bathroom sink drain stopper is a simple task that can be completed in a matter of minutes. By following these steps, you can easily restore the look and functionality of your sink.